News and Media Releases

First-Ever Aviation Oil for Two Stroke Engines

20/01/2010

Shell To Launch New Lubricant At US Sport Expo In Sebring

Shell Aviation is pleased to cement its position as a leading innovator in the general aviation industry with the introduction of its newest lubricant, AeroShell Oil Sport PLUS 2. Our aviation research and development specialists in both Europe and the United States have worked closely with major engine manufacturers to produce the world’s first dedicated 2-stroke engine oil for light sport aircraft. Visitors to the 2010 US Sport Aviation Expo in Sebring, Florida this January will be the first to discuss and have the opportunity to purchase this new product at the AeroShell booth in Tent A-18.

AeroShell Oil Sport PLUS 2 is the first oil specifically developed for light, very light and ultralight 2-stroke engines such as the ROTAX ® air and water-cooled series engines, as well as premix and separate oil injection systems. These types of engines commonly encounter intense operating conditions such as full power take off, cruise, descent and idle conditions. A 2-stroke oil formulation is ideal for the varying power outputs and higher operating temperatures experienced by 2-stroke engines.  It also helps reduce the formation of deposits and protects the inherent exposure to corrosion and potential ring sticking in 2-stroke engines. AeroShell Oil Sport PLUS 2 provides full performance with both unleaded and leaded fuel types, and this oil also can be used in most climates.

The new AeroShell Oil Sport PLUS 2 for light, very light and ultralight 2-stroke engines is backed by 100 years of experience in aviation lubricants and engines. Its launch comes shortly on the heels of Shell Aviation's earlier introduction of AeroShell Oil Sport PLUS 4, also the first dedicated aviation oil for 4-stroke engines in light sport aircraft. Both products were developed and tested specifically for use in aviation. 

Lockwood Aviation Repair, which promotes itself as an official distributor of the largest inventory of ROTAX engine parts in the U.S. based in Sebring, has thoroughly tested the new AeroShell Oil Sport Plus 2 under a variety of severe conditions. Phil Lockwood, president, said, "I was very impressed with Shell's commitment to develop the best possible 2 stroke oil engineered and tested specifically for this demanding application. We are lucky to have their quality control behind this very specialized 2 stroke oil and can be confident they will support any advances to this dedicated formula with further testing.”

After the engines were tested, they were then stripped and the components inspected by an expert from an independent, non-profit research and development organization that provides contract research to industrial customers worldwide. The laboratory has previously reviewed other global brand lubricants for heat, pressure and corrosion resistance. 

Historically, 2-stroke engine pilots have relied on commercially available oils intended for ground or marine based applications, which are not wholly suitable for all aircraft. For example, motorcycle oils are subject to formulation changes that follow the needs of the motorcycle market and are not subject to aviation specifications or notification requirements. Further, motorcycle oils tend to have limited ability when used in conjunction with leaded aviation fuels such as Avgas 100LL.

Now, pilots in light to ultralight planes have fuels and lubricants provided by Shell Aviation that are designed specifically for their class of aircraft. Additionally, Shell Aviation is the only company whose aviation lubricant products have the endorsement of ROTAX. This manufacturer recognizes the benefits of AeroShell Oil Sport PLUS 2 and AeroShell Oil Sport PLUS 4, which are dedicated products that are highly resistant to the immense shear forces that occur in areas of high-pressure contact such as bearings, pistons, rings and liners. This is where the blend of base oil and additives is most crucial, and another reason to use products that are specifically designed for 2 stroke engines.

While AeroShell Sport PLUS 2 will be available for purchase at Tent A-18 at the US Sport Aviation Expo in Sebring, interested customers also can purchase it from AeroShell distributors or online at http://www.shellaviationstore.com after the Expo.

AeroShell Oil Sport PLUS 2 - At A Glance

• First specific oil for Light Sport and Very Light/Ultra Light 2 - stroke aircraft engines
• High film and shear strength formulation specifically designed for strenuous operating conditions experienced by these types of aviation engines
• Promotes engine cleanliness - protects engine parts such as pistons, rings and exhaust ports from excessive (or harmful) deposits - coking
• Outstanding performance in regard to ring ‘sticking’
• Excellent ‘clean burn’ performance
• Helps to protect engine parts from corrosion during engine shutdown and storage
• Helps engine achieve TBO (Time Before Overhaul)
• Suitable for use in oil injection and pre-mixed oil/fuel systems
• Protects highly stressed engine parts against scuffing and wear
• Can be used in most climates
• Superior performance compared to synthetic 2-stroke products when used in the aviation application
• Advanced anti-rust and anti-wear package
• Dyed green for better recognition

Shell Aviation has been providing high quality fuelling and aviation services to the international market for many years, refueling approximately 20,000 aircraft at more than 800 airports outside the United States. In the U.S., the Shell Aviation business is part of Shell Oil Products US, a subsidiary of Shell Oil Company. Shell Oil Company is an affiliate of the Royal Dutch/Shell Group of Companies (NYSE: RD/SC).

INQUIRIES:  Shell Oil Products US  Shell Media Line   +1 (713) 241-4544

Disclaimer Statement

This announcement contains forward-looking statements concerning the financial condition, results of operations and businesses of Royal Dutch Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements. Forward-looking statements are statements of future expectations that are based on management’s current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements. Forward-looking statements include, among other things, statements concerning the potential exposure of Royal Dutch Shell to market risks and statements expressing management’s expectations, beliefs, estimates, forecasts, projections and assumptions.

These forward-looking statements are identified by their use of terms and phrases such as ‘‘anticipate’’, ‘‘believe’’, ‘‘could’’, ‘‘estimate’’, ‘‘expect’’, ‘‘intend’’, ‘‘may’’, ‘‘plan’’, ‘‘objectives’’, ‘‘outlook’’, ‘‘probably’’, ‘‘project’’, ‘‘will’’, ‘‘seek’’, ‘‘target’’, ‘‘risks’’, ‘‘goals’’, ‘‘should’’ and similar terms and phrases. There are a number of factors that could affect the future operations of Royal Dutch Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this Report, including (without limitation):

(a) price fluctuations in crude oil and natural gas;

(b) changes in demand for the Group’s products;

(c) currency fluctuations;

(d) drilling and production results;

(e) reserve estimates;

(f) loss of market and industry competition;

(g) environmental and physical risks;

(h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions;

(i) the risk of doing business in developing countries and countries subject to international sanctions;

(j) legislative, fiscal and regulatory developments including potential litigation and regulatory effects arising from recategorisation of reserves;

(k) economic and financial market conditions in various countries and regions;

(l) political risks, project delay or advancement, approvals and cost estimates; and

(m) changes in trading conditions. All forward-looking statements contained in this presentation are expressly qualified in their entirety by the cautionary statements contained or referred to in this section.

Readers should not place undue reliance on forward-looking statements. Each forward-looking statement speaks only as of the date of this presentation, May 4, 2006. Neither Royal Dutch Shell nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this document.

The United States Securities and Exchange Commission (SEC) permits oil and gas companies, in their filings with the SEC, to disclose only proved reserves that a company has demonstrated by actual production or conclusive formation tests to be economically and legally producible under existing economic and operating conditions.  We use certain terms in this presentation, such as “oil in place" that the SEC's guidelines strictly prohibit us from including in filings with the SEC.  U.S. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575 and disclosure in our Forms 6-K file No, 1-32575, available on the SEC website www.sec.gov. You can also obtain these forms from the SEC by calling 1-800-SEC-0330.